Electronics Kits

Buy Electronic Soldering Kits to practice and gain experience with hardware repairs and soldering. Practicing with these kits will help you to become more efficient and confident while soldering and fixing your own keyboards.
Sort By:  
Basic Electronics Tool Kit with Soldering Iron UK Plug
This electronics soldering kit comes with the following:
  • 5" (125mm) diagonal cutting nipper
  • 5" (125mm) snipe nose pliers
  • 6"(150mm) slant edge cutting nippers
  • 6" (150mm) long nose pliers
  • 7 in 1 crimp tool (0.9 - 5.5mm)
  • 3 Crystal line colour screwdrivers phillips (3x75, 5x75, 6x100mm)
  • 3 Crystal line screwdrivers Slotted (3x75, 5x75, 6x100mm)
  • Utility knife (snap off blades)
  • Stainless tweezers 51/2"
  • 1 Roll PVC tape
  • 7 piece folding hex wrench (1.2, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0)
  • 6" Stainless steel scissors
  • 2 Piece needle file set (round & flat)
  • 3 Piece soldering aid kit
  • Utility component storage box (165x90x45mm)
  • Soldering iron stand
  • 40W Soldering iron
  • Digital multimeter AC/DC voltage
  • Rosin core solder
  • Desolder pump,
  • Interior tool tray
FM Radio Electronics Kit
The FM radio kit uses industrial surface mount ICs (the Si4820 and the NCP2890). The FM radio kit is supplied with the ICs mounted on the board and you just have to solder the remaining resistors, capacitors and other components to finish the kit.
  • Includes an audio amplifier and output is via a 66mm speaker
  • Controls for tuning and volume
  • Can be powered from a 2.5V to 5.5V supply or 3x AA batteries (not supplied)
  • Output power: 1W
  • Polybag pakaging

Contents: 1x Si4820 FM Radio IC, 1x CM1213A ESD Diode, 1x TLV700 3.3V LDO 200mA Regulator, 1x NCP2890D Mono Amplifier IC, 1x Fixed Inductor 270nH, 1x 100K, 1x 10K 16mm Linear Potentiometers, 5x Electrolytic Capacitor, 50V, 1uF, 3x 50V, 100nF, 1x 33pF, 2x 22pF, 2x 470nF, 1x 50V, 470pF, & 1x 50V, 1nF Ceramic Capacitors, 1x Electrolytic Capacitor, 16V, 100uF, 2x 220K, 1x 56K, 1x 3.3K, 1x 100K, 2x 0R, 1x 6.8K, 1x 470R, 1x 100R & 1x 10K Resistors, 1x Watch Crystal for Radio, 1x 3xAA Battery Cage with Flying Leads, 1m x Single Core Wire, 1x 8 ohm 66mm Speaker, 1x FM Radio PCB
Per Page      1 - 2 of 2
  • 1